PRODUCTS
Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.
Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
Reinforced Steel Bar refers to steel with surface protruding ribs and straight strips, which helps to strengthen the adhesion between concrete and steel bars and it helps to create strong pull between steel bars and cement. It is suitable for reinforced concrete projects that require high strength, such as houses and well contorlled in accordance with the latest version of TIS 24-2559. The quality grade (steel symbol) is SD 40 and SD 50. The nominal diameter is from 10 mm to 40 mm. The standard lengths are 10 M and 12 M and lengths is also available according to the customer's requirements.
HPB300/HRB335 Reinforcement Rebar
HPB300 grade: The yield strength of steel bars in this grade is 300MPa, with high plasticity and toughness, suitable for general structural reinforcement and stirrups. HRB335 grade: The yield strength of this grade of steel bars is 335MPa, with high strength and good ductility, suitable for general structural reinforcement and stirrups, especially for projects with high strength requirements.
ST37 ST53 ASTM A106 GR.B Thick Wall Seamless Steel Pipe
ST37 ST53 ASTM A106 GR.B Thick Wall Seamless Steel Pipe
DIN 2609 Grade St 37-0 Tube is made up of a carbon steel or mild steel that is corrosion resistant and strong. The dimensions of the seamless pipes and welded pipes vary. The seamless pipes range from 4mm to 219mm in outer diameter and the welded and Electric Fusion welded pipes range from 5mm to 1219.2mm in outer diameter. The pipes also range from 0.5mm to 20mm in wall thickness.
ERW steel pipe is a straight seam electric resistance welded pipe, abbreviated as ERW pipe, which is a round pipe welded by steel plates. It is used to transport vapor and liquid objects such as oil and n atural gas, and can meet various requirements of high and low pressure.
Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500°C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.
RINA is a founding member of the International Association of
Classification Societies(IACS),formed in 1968. The RINA fleetis recognized by approximately 116 international flag authorities.
RINA integrated services for the complate shipping cycle including design, building, shipyard management, inspection and testing of
materials/components and regular inspections to maintain the class
P460NL2 Boiler and Pressure Vessel steel plate
EN10028 P460NL2 steel plate, Europe standard P460 NL2 steel plate, under Europe standard standard P460NL2 steel plate is one of the mainly High Yield steel, Boiler steel plates P460NL2 tensile strength is at 570-720 Mpa for thickness belows 60mm,even maximum 730 Mpa is OK for the product thicknesses up to 16 millimeters.
SA 203 GR.D Alloy Pressure Vessel Steel plate
SA203 Grade D steel grade is a nickel alloy steel plate in welded pressure vessels.
A514 GR.H High Temperature Pressure Vessel Steel Plate
ASME SA514 standard specification for pressure vessel plates,
carbon steel, for intermediate-and higher-temperature service
ASME SA514 grade H plates shall be normalized.
MAIN PRODUCTS
CONTACT INFORMATION
Tel：+86 15865761766
WhatsApp：+86 15865761766
Email：amanda@guojiesteel.com
Address: No. 88, Dongchang East Road, Economic and Technological Development Zone, Liaocheng City, Shandong Province
Copyright ©
