PRODUCTS
JIS G3101 SS400 Carbon Steel Bar
JIS G3101 SS400 steel is one of the most commonly used hot rolled general structural steel. JIS G3101 SS400 steel is usually supplied as SS400 steel plates, sheets, flats, bars, sections, etc.. No matter what form it is, JIS G3101 SS400 chemical composition will not change.
201/201LN stainless steel is an austenitic steel. Its primary alloying elements are chromium, nickel, and magnesium. It shows excellent toughness at lower temperatures and is purposed across industries for use in appliances, restaurant equipment, sinks, automotive trim, and more.
AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears and other applications. AISI 4140 steel gives greater strength and heat treatment capabilities in comparison.
Type 316L stainless steel in a molybdenum bearing austenitic. It is more resistant to general corrosion and pitting than conventional nickel chromium stainless steels such as 302-304. It has the following characteristics:Higher creep resistance,Excellent formability,Rupture and tensile strength at high temperatures,Corrosion and pitting resistance.
1008 steel round bar are medium carbon and chromium steel which has excellent tensile strength. This is welded and then used for screw machine parts, shafts, pins, spindles and rods. Also available in various other industries. SAE 1008 round bar has many chemical and mechanical properties such as steel grade, tensile strength and elongation.
Alloy 2507 (UNs S32750) is a super duplex stainless steel containing 25% chromium, 4% molybdenum and 7% nickel. The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity and low coefficient of thermal expansion. Commonly used in chemical process, petrochemical and seawater equipment.
AISI 4340 steel is a medium carbon, low alloy steel known for its toughness and strength in relatively large sections. AISI 4340 is also one kind of nickel chromium molybdenum steels. AISI 4340 steel properties offer good ductility in the annealed condition, allowing it to be bent or formed.
Grade 304 is the most commonly used stainless steel. It is an austenitic, corrosion-resistant steel with excellent strength, toughness, fabrication characteristics and weldability. The low carbon version, 304L, may be required for full corrosion resistance when thicker sections are welded.
SAE 1018 Carbon Steel Flat Bar
SAE 1018 carbon steel is a free machining grade that is the most commonly available grade around the world. Although its mechanical properties are not very unique, it still can be easily formed, machined, welded and fabricated.
310S stainless steel sheets is similar to stainless steel 310 apart from a lower content of carbon that reduces carbideprecipitation and enhances weldability. The soaring nickel and chromium contents of ss 310s plates offer similar corrosionresistance, higher resistance to oxidation and the holding of a superior portion of room temp potency than the usual austeniticsteel such as S304.
MAIN PRODUCTS
CONTACT INFORMATION
Tel：+86 15865761766
WhatsApp：+86 15865761766
Email：amanda@guojiesteel.com
Address: No. 88, Dongchang East Road, Economic and Technological Development Zone, Liaocheng City, Shandong Province
Copyright ©
